Ironside Customs

Can-am Emblems

replacement badges

Can-Am BRP Sprocket Logo Hood Emblem Decal for Spyder Maverick Ryker is a replacement to customize your Ryker, Maverick or Spyder with 3D printed emblem with up to 4 additional colors and resin epoxy coated. Comes with everything you need to install. Not just a sticker or a plain 3D printed disk. This is a solid disk in coated with UV epoxy and includes 3M VHB adhesive and alcohol wipes.

Purchase on my Etsy Store

Easy to replace and remove

comes with alcohol wipe and strong double-sided transparent 3M VHB tape

sized to match original BRP emblems

Sets include two 48.5 mm (4.8 cm or about 2 inches) emblem replacements + a tiny dash emblem that is 12 mm (1.2 cm or .5 inches)

Devil Kitty is my personal Can-am Ryker.  I have added my 3D printed devil kitty emblem which is made with Magenta PETG background and a Hello Kitty with horns and a tail in white and black additional colors.
Devil Kitty

Can-am emblems for Ryker. original BRP logo emblem next to my 3D printed emblems prior to adding UV epoxy and other emblems I have made for people like Ryker Ryderz and Top Notch Ryker Mods.

Can-am Maverick with the 6.8 centimeter emblem
Can-am Maverick with the 6.8 centimeter emblem

Instructions on how to replace the original BRP logo

It is easier than I thought to remove the original BRP logo without damaging the vehicle or the logo. I am keeping my original logo’s in a safe place so that I can replace them if I ever sell (since it may be hard to find another person who loves Hello Kitty). It bent a little but it is thin aluminum and will be easy to reshape and take back on.

Message me on Etsy messenger, Facebook or Instagram with your questions. Send me an image and I will convert it to a 3D printed emblem to put on your Can-am Ryker or tell me what you like and I will design it or find it. I also make the tiny emblems on the speedometer gauge display housing but images could be distorted due to size. Please let me know if you would like one and I will include free of charge with your emblem order.

Ironside Customs is not responsible for any damage caused by installation or removal of our products.

Can-am Spyder BRP logo emblem badge replacement and matching keychain

https://www.etsy.com/listing/1206562941/spyder-f3-st-rt-etc-full-set-custom

Easy to replace and remove

comes with alcohol wipe and 3M VHB tape – It needs to be held on for 72 hours, it is hard to remove and may damage surfaces and cannot be moved and re-adhered. If you would prefer a different adhesive, you can use your own adhesive.

UV resistant epoxy coated to match original BRP emblems

(2) 68mm emblem for Front & Rear Spyder Models without Top Case
(1) 48mm emblem for Rear on Spyder Models with Top Case
(2) 38mm emblems both front Wheels
(1) 19.75 mm (3/4″) emblem for Center Dash Decal

Ironside Customs is not responsible for any damage caused by installation or removal of our products.

» 2008 Spyder GS
» 2009 Spyder GS
» 2010 Spyder RS / RS-S / RT / RT-S
» 2011 Spyder RS / RS-S / RT / RT-L / RT-S
» 2012 Spyder RS / RS-S / RT / RT-L / RT-S
» 2013 Spyder RS / RS-S / RT / RT-L / RT-S / ST / ST-L / ST-S
» 2014 Spyder RS / RS-S / RT / RT-L / RT-S / ST / ST-L / ST-S
» 2015 Spyder F3 / F3-S / RS / RS-S / RT / RT-L / RT-S / ST / ST-L / ST-S
» 2016 Spyder F3 / F3-L / F3-S / F3-T / RS / RS-S / RT / RT-L / RT-S / ST-S
» 2017 Spyder F3 / F3-L / F3-S / F3-T / RT / RT-L / RT-S
» 2018 Spyder F3 / F3-L / F3-S / F3-T / RT / RT-L
» 2019 Spyder F3 / F3-L / F3-S / F3-T / RT / RT-L
» 2020 Spyder F3 / F3-L / F3-S / F3-T / RT / RT-L
» 2021 Spyder F3 / F3-L / F3-S / F3-T / RT / RT-L
» 2022 Spyder F3 / F3-L / F3-S / F3-T / RT / RT-L

Made In: USA

RYKER SET Emblem replacement badges Set of 3 Can-am BRP

https://www.etsy.com/listing/1110594155/ryker-set-emblem-replacement-badges-set

Can-am Ryker BRP logo emblem badge replacement

Easy to replace and remove

comes with alcohol wipe and strong double-sided transparent adhesive – recommend pushing down and holding as tightly as possible for as long as possible.

UV resistant epoxy coated to match original BRP emblems

2 emblem replacements + tiny for instrument cluster
1.909 inches or 48.5 mm x 2.75mm for front an back
.5 inches for tiny

Ironside Customs is not responsible for any damage caused by installation or removal of our products.

Leave a Reply

Your email address will not be published.