Ironside Customs

Shock Covers for Can-am Ryker 600 or 900 Ace and Rally or 22 Sport

If you are unsure which to select check the measurements = 600 or 900 has a longer blank section on the shock than the Rally or 22 Sport shocks do.

600 or 900 – 120 mm/12 cm/4.75 in
Rally or 22 Sport – 76 mm/7.6 cm/3 in

3D printed shock covers – please create Etsy account to receive preview of product prior to sending.

Some of my products I do use PLA+ which has a higher heating point and is tougher than regular PLA but is still weaker than PETG! Be gentle with them, they are PLASTIC. Silk PLA is the weakest, handle with care.

I will take special requests, so please message me if there is a color that you would like that isn’t listed

You will receive 2 shock covers for the front wheels
See http://www.ironsidecustoms.com/color-comparison/ for more pictures. of the different colors

Covers designed by Brannon King from BKD Exhaust

Ironside Customs is not responsible for any damage caused by installation or removal of our products.’